Skip Ribbon Commands
Skip to main content


You can edit your user data or change your password here.


​​​If you are already registered, please enter your e-mail address and password below and click "LOGIN".



No access data yet? Now click on REGISTER.​


Es reicht eine Seite, die - richtig angelegt - sowohl auf verschiedenen Browsern im Netz funktioniert, aber ebenso gut für den Ausdruck oder die Darstellung auf einem Handy geeignet ist. Wohlgemerkt: Eine Seite für alle Formate.


AKSHeaderItemTypeForgottenPW Content


AKSHeaderItemTypeChangePW Content




Schüco MFM AF 450

  • Cost reduction, quality improvement and efficiency in production
  • Machining rods greater than 6m on 3 sides plus at end faces
  • Especially suitable for façades, doors, sliding systems and windows
  • High flexibility due to 12 tools and 7.5kW motor
  • Separately driven clamping blocks for procedures during processing
  • Profile length measuring device for precise measurement of profile length 

CNC profile machining – Master class with control

Cost reduction / quality improvement
● By using absolute position measurement systems in all main axes avoids referencing after switching on the machine.
● The control software Schüco CAM uses 1:1 the data of SchüCal software, and thus reduces the time it takes from the first sketch up to clamping of the workpiece to a minimum.
● Separately driven clamping blocks enable simultaneous processing, thus reducing the setup time to a minimum.
● The contact edge of the profile is shifted to the front, allowing an easier loading of profiles. The insertion position is constantly in the front regardless of the profile size.
● Profile lengths of already saw cut profiles can be calibrated using a profile length measuring device (optional) on the machine.
● The tool magazine as a parallel moving pick-up device ensures rapid, program-controlled exchange of altogether 12 tools. 


Features and equipment

3-sides machining of aluminium and steel profiles
● Steel machining (S235 to approx. 5 mm wall thickness, no on-head machining)
● 7.5 kW spindle / maximum 24000 1/min / compression air-cooled
● Network card
● Inherently rigid machine bed for high stresses
● Main axes slide on precision linear guides
● The profile is firmly clamped by pneumatic clamps
● Absolute position measurement system of the main axes
● 4 foldable fixed stops for exact zero point determination
● Automatic tool changer with 12 positions
3 Operating modes
● Single rod with excess length profile bar machining over the entire machining length of 7200 mm and beyond.
● Multi-rod with different contours, several profiled bars (up to 4 bars) in different contours and lengths
● Shuttle operation with ASP System 2 zones, each with one profile bar
● Automatic clamping block positioning (ASP)
● Easy placing and removing the profiles by the contact edge shifted to the front
● Profile systems with quick-change system
● Tool cooling is done by a minimal timed spraying device
● The axes are automatically lubricated by a centralized system
● Chip drawers
● Paint: RAL 9006 (white aluminum), RAL 7016 (anthracite gray) 

System features

SystemMachines / Tools
TypesCutting machine
Key figuresLength in mm: 9660,0
Depth in mm: 3190,0
Weight in kg: -1,0