Exterior window element with surrounding fixed fields
For openable elements, a CE marking can be created. CE or ÜA CE from 01.10.2019 "a must"
If an openable element has been tested in an associated supporting structure,
(same glass, same construction) and left or right or up or down a fixed field is
connected, then it is a portal → CE CE or ÜA CE from 01.10.2019 "a must"
If further fixed elements are installed, then these are to be marked ÜA . ÜA
Exterior window element standing alone
Marked with either CE or ÜA, where: CE as a "can" rule CE or ÜA CE from 01.10.2019 "a must"
Exterior door element standing alone
Marked with either CE or ÜA, where: CE as a "can" rule CE or ÜA CE from 01.10.2019 "a must"
Exterior door element with Fixed Panel (as Portal)
Schüco ADS 80 FR60: see order catalogue chapter "outdoor application" CE or ÜA CE from 01.10.2019 "a must"
Schüco ADS 80 FR30: Permitted based on the information in Schüco ADS 80 FR60 CE or ÜA CE from 01.10.2019 "a must"
If further fixed elements are installed, then these are to be marked ÜA . ÜA
Façade element with insert element
If an external (door) element has been tested together with the façade, then CE or ÜA CE from 01.10.2019 "a must"
the supporting structure is an essential component. Door CE ("can"), Façade CE
Additional information on façades
A special feature in AT is that there are no complete fire protection façades, but usually only sections.
This means that in these cases a ÜA marking is required.
Open elements with a closed system cannot be checked and a CE marking is therefore inadmissible (e.g. balconies).
