If you are already registered, please enter your e-mail address and password below and click "LOGIN".
No access data yet? Now click on REGISTER.
With the Schüco Sliding System ASS 77 PD.NI (Non Insulation) highly transparent sliding systems can be implemented with large leaf formats and narrow face widths - for light-filled spaces.As a non-insulated system Schüco ASS 77 PD.NI is suitable for use in warm climates or indoors.
Yes. For RC2, other locking components, product no. 276455, and in addition the adaptor pieces, product no. 276328, are used. The glazing has to be glued (P4A). See K drawing K1010322 for RC 2 locking of Schüco ASS 77 PD.HI.
Please choose the respective current firmware / software versions (see "Current") according to your product.
We also make a point of listing the historical versions (see "Expired") in this directory - if available.
1) Schüco ASS 77 PD
Schueco ASS 77 PD ServiceTool V0.28 2019-02-18.zip
Wichtige Information Stand 2019-02-18.txt
Schueco ASS 77 PD Service Tool V0.27 2018-01-24.zip
Schueco ASS 77 PD Service Tool V0.26 2016-02-19.zip
Schueco ASS 77 PD Service Tool V0.24 2015-06-25.zip
2) Main control unit
Schueco ASS 77 PD - V35 2016-03-03.zip
3) Slide drive
Schueco ASS 77 PD Service V23 2014-10-17.zip
Profiles Anodisation according to specifications for coastal areas
Fitting All fitting parts are to be treated in accordance with guidelines for coastal areas
Castors Schüco Standard Castors are only partially suitable for coastal areas - 240 hours are achieved in the salt spray test. Increased maintenance is to be expected.
NSK corrosion-resistant bearings are available by special order - these last 480 hours. As of 2018-03, an endurance test will soon be carried out with them. However, here too, the castors would have to be swapped from time to time - half as often as standard rollers.
Bild Ergebnisse Salzsprühnebeltest 2018-03.pdf
As of June 2018, DowCorning's edge sealant materials are:
DowCorning 3362 remains on the market and is the standard secondary sealant. DowCorning 3363 replaces DC 3362 HD, where DC 3363 has a greater hardness than DC 3362. According to DowCorning both products have an ETAG 002 approval.
Schüco confirms that the products DC 3362 and DC 3363 are compatible with the Schüco products 288180 and 288181. The information in the Schüco catalogues will be adapted in the coming weeks
General statements about the primary sealant are hardly possible because there are different qualities. According to the manufacturer, the adhesive 288180 is compatible with high-quality butyl-based primary sealants (PIB). Our customers must continue to ask the respective manufacturer of insulating glass about this.
Information The brand names of DowCorning have changed. For example, Dow Corning 3362 is now called DOWSIL 3362.
1) Requirements for the purchase of Schüco Panorama sliding systems
2) Registration of prospective customers at www.alukoenigstahl.com After registration, prospective customers can access the relevant series documents in AKS TechDoc and also the certification documents in AKS e-Academy. AluKönigStahl assigns the access authorisation after consultation with the responsible sales field staff and evaluation of the workshop equipment.
3) Access to AKS e-Academy for certification training The participants will be given access to the training documents of the AKS e-Academy before the certification training. Also retrievable are preparatory tests for the final certification test in several languages.
4) Certification training and personalised certification test AluKönigStahl offers certification training at regular intervals. Certificates are issued on a personal basis. At least one person in a company must be certified, and preferably three employees respectively for assembly, production and planning.
The final certification test can be done on paper or by e-Questionnaire. Registration on our homepage and taking a laptop along for the training are (also) recommended.
The result of the test must be > 50% (for one point for each question, all the respective possible answers must be correct).
5) Approval for delivery The Schüco and AluKönigStahl ERP system provides a fundamental block of relevant articles from the PD systems. With positive certification, this block will be lifted. The names of the certified persons for each company are held in evidence at AluKönigStahl. Recertification is required after 3 years.