If you are already registered, please enter your e-mail address and password below and click "LOGIN".
No access data yet? Now click on REGISTER.
The system allows designing of façades in Semi Structural Glazing look.
The sealing components without sealant application are used in mullion and transom push-fit for efficient and safe installation.
For legal reasons, AluKönigStahl may only supply SG profiles (Structrual Glazing) to companies if a valid SG contract exists.
There are four possible variants A) An MB processor wants to glue; then there must be a valid contract with the customer.A1) If AKS is without a contract to date and if the processor is ready to sign a contract, AKS sends the long form of the Schüco / AKS SG contract via VKA staff. A2) If AKS is without a contract to date and if the processor refuses to sign the contract, at least the minimum version of the AKS SG contract must be signed.
B) Instead of the processor, a gluing operation does the gluing at the option of the MB customer; Again, a valid contract is required.B1) If AKS is without a contract to date and if the gluing operation is ready to sign a contract, PM International sends the long form of the Schüco / AKS SG contract. B2) If AKS is without a contract to date and if the gluing operation refuses to sign the contract, at least the minimum version of the AKS SG contract must be signed.
Contact for questions since May 2018 Mr. Danislav Stratiev, firstname.lastname@example.org; Tel. 00359 2 817 1929.
Where are the contracts to be found? All contracts (raw versions and signed versions) can be viewed and downloaded by AKS employees on the AKS Sharepoint. https://portal.alukoenigstahl.net/AKS-I/AKS Verträge/Lizenzverträge SG
Contracts for countries outside of Austria must be translated by our organisations before shipment in the local language.
1) Delivery status Schüco profiles for the SG version are delivered with a special anodised surface. The special anodising provides a specially compacted surface on which adhesives hold particularly well. Only a few companies in Europe are certified to carry out this anodising surface.
2) "Expiration date" of the surface For SG profiles, it is important to note that the anodised surfaces have an expiration date. Use after expiration is only possible after consultation with Schüco or AluKönigStahl.
3) Exceptions If inadvertently raw goods are delivered, further measures are only permitted in coordination with Schüco or AluKönigStahl. Projects without special anodising are possible if positive tests have been carried out in advance with the adhesive manufacturer. Area of responsibility: Adhesive manufacturer or gluing operation
4) Contract Prior to delivery of SG materials, an SG contract must be concluded between the company being supplied by AluKönigStahl and AluKönigStahl. The supplied operation may be a metalworking or a glazing operation. The contract regulates the liability issue. Liability for damage caused by faulty SG bonding is generally the responsibility of the bonding operation. This must be tested and certified (Conformity procedure 1, ETAG 002 Regulation).