Skip Ribbon Commands
Skip to main content


You can edit your user data or change your password here.


​​​If you are already registered, please enter your e-mail address and password below and click "LOGIN".



No access data yet? Now click on REGISTER.​


Es reicht eine Seite, die - richtig angelegt - sowohl auf verschiedenen Browsern im Netz funktioniert, aber ebenso gut für den Ausdruck oder die Darstellung auf einem Handy geeignet ist. Wohlgemerkt: Eine Seite für alle Formate.


AKSHeaderItemTypeForgottenPW Content


AKSHeaderItemTypeChangePW Content




Schüco AOC 50 SG ST.SI

  • Add-on construction in 50 mm system width on steel for vertical façades and glass roofs
  • SG solution with high thermal insulation: Uf values up to 0.86 W/(m²K)
  • SI range of insulators for the roof area
  • Double and triple insulation glass easy to use
  • Three drainage levels for maximum design flexibility
  • Integration of Schüco AWS 114 as projected top-hung or parallel vent windows
  • Large surface automated window solutions for standard and RWA
  • Burglary protection rating RC 2
  • Glass weights up to 1190 kg
  • Glass thickness ranges of 32 mm to 64 mm can be used
  • Efficient assembly by setting technology 

The add-on construction AOC 50 on steel (ST) with best insulation values with the simplest processing

​The add-on construction AOC 50 on steel (ST) combines this energy-efficient construction with efficient fabrication and assembly.

The system also allows for the design of the façades in Semi Structural Glazing look.

The sealing components without sealant application are used in mullion and transom push-fit for efficient and safe installation.

The bolt-setting technology on steel substructures ensures short production times compared to welding. 


System features

SystemFacades and Skylights
Add-on construction
TypesAdded construction
Glittering glass façade
SecurityBurglar resistant RC2
FeaturesFall protection
Multi Countour
Steel effect
Structural Glazing
Semi Structural Glazing
SurfaceAlu crude (refinementable)
Sound insulationincreased sound insulation 38 - 45 dB
increased sound insulation more than 45 dB
Standard up to 38 dB
Key figuresThermal insulation Uf in W/m²K: from 0,8 to 1,6
Sound insulation Rᵥᵥ,ₚ in dB: from -1,0 to -1,0
Standard face width in mm: 50,0
Powder: all Variations
Eloxal: all Variations
Wet coating: all Variations
Stainless steel look: Possible
Airtightness: -1
Driving rain proofness: -1
Shockproof: -1

​For legal reasons, AluKönigStahl may only supply SG profiles (Structrual Glazing) to companies if a valid SG contract exists.

There are four possible variants
A)  An MB processor wants to glue; then there must be a valid contract with the customer.
A1) If AKS is without a contract to date and if the processor is ready to sign a contract, AKS sends the long form of the Schüco / AKS SG contract via VKA staff.
A2) If AKS is without a contract to date and if the processor refuses to sign the contract, at least the minimum version of the AKS SG contract must be signed.

B) Instead of the processor, a gluing operation does the gluing at the option of the MB customer; Again, a valid contract is required.
B1) If AKS is without a contract to date and if the gluing operation is ready to sign a contract, PM International sends the long form of the Schüco / AKS SG contract.
B2) If AKS is without a contract to date and if the gluing operation refuses to sign the contract, at least the minimum version of the AKS SG contract must be signed.

Contact for questions
since May 2018 Mr. Danislav Stratiev,; Tel. 00359 2 817 1929.

Where are the contracts to be found?
All contracts (raw versions and signed versions) can be viewed and downloaded by AKS employees on the AKS Sharepoint. Verträge/Lizenzverträge SG

Contracts for countries outside of Austria must be translated by our organisations before shipment in the local language.

1) Delivery status
Schüco profiles for the SG version are delivered with a special anodised surface.
The special anodising provides a specially compacted surface on which adhesives hold particularly well.
Only a few companies in Europe are certified to carry out this anodising surface.

2) "Expiration date" of the surface
For SG profiles, it is important to note that the anodised surfaces have an expiration date.
Use after expiration is only possible after consultation with Schüco or AluKönigStahl.

3) Exceptions
If inadvertently raw goods are delivered, further measures are only permitted in coordination with Schüco or AluKönigStahl.
Projects without special anodising are possible if positive tests have been carried out in advance with the adhesive manufacturer.
Area of responsibility: Adhesive manufacturer or gluing operation

4) Contract
Prior to delivery of SG materials, an SG contract must be concluded between the company being supplied by AluKönigStahl and AluKönigStahl. The supplied operation may be a metalworking or a glazing operation.
The contract regulates the liability issue. Liability for damage caused by faulty SG bonding is generally the responsibility of the bonding operation. This must be tested and certified (Conformity procedure 1, ETAG 002 Regulation).